Post by Magma on Dec 17, 2007 20:46:20 GMT -5
Alright so you want to set up a stealth bot in your channel, well the first thing you do is go here: www.stealthbot.net/board/getsb.php
Download it, click save to desktop, not open or run.
Next, After its done there should be an icon on your desktop that sais Installsb
Click it, press I Agree, then make sure its being installed into your program files unless you dont want it there.
Hit install.
Once its done now there should be the stealthbot icon on your desktop,
click it to open your bot.
Next you need to press settings then bot settings at the top of the bot, it should bring up a box that looks like this:
Enter your Warcraft Username, then password, then cd key (and the expansion key if you want to get on frozen throne). When entering your cdkey do not put dashes or spaces in it. Add the channel you want the bot to go too, choose a server, then choose the game you want it to connect too. (you need a key for each game you want to get on.) Then hit apply and close.
At this point if you press connect then it WILL come up with one of the following messages:
-Version Check Failed
[BNET] Version check failed!
[BNET] BNLS has not been updated yet, or you experienced an error. Try connecting again.
-Bad Product Version
[BNLS] Error! Bad product version.
-BNLS Error 10022 (not the run-time error)
[BNLS] Error 10022: Socket not bound, invalid address or listen is not invoked prior to accept
-BNLS Error 10053/10054
[BNLS] Error 10053: Connection is aborted due to timeout or other failure
[BNLS] The BNLS server has terminated your connection.
[BNLS] Error 10054: The connection is reset by remote side
[BNLS] The BNLS server has terminated your connection.
-BNLS Error 10060/10061/10065
[BNLS] Error 10060: The attempt to connect timed out
[BNLS] The server took too long to respond to your computer. The BNLS server appears to be unreachable at this time.
[BNLS] Error 10061: Connection is forcefully rejected
[BNLS] The server you're connecting to is currently down. The BNLS server appears to be down at this time. Please keep trying, or wait an hour or so and try again.
[BNLS] Error 10065: No route to host.
-BNLS Error 11001/11004
[BNLS] Error 11001: Authoritative answer: Host not found
[BNLS] Your computer is unable to contact the BNLS servers.
[BNLS] Error 11004: Valid name, no data record of requested type
[BNLS] Your computer is unable to contact the BNLS servers.
Version disabled (mostly stuck at "[BNET] Checking version...")
This version of StealthBot has been disabled.
Please visit www.stealthbot.net for more information and to download an updated version.
(If you are receiving this message in error, please check your firewall settings, especially programs such as Norton Internet Security. NIS is notorious for blocking the connection to the BNLS server.)
In order to fix this you must go here:
www.stealthbot.net/board/index.php?showtopic=11542
On step 1 it has 2 Files to download, since you are using the bot for warcraft right click on the one that sais: Diablo II and Warcraft III: StealthBot v2.6R3.exe
Save it to your stealthbot folder, when it asks if you want to replace the old one you MUST hit yes.
(because you have done this you must also get rid of the stealhbot icon on your desktop, and create a shortcut from the new stealthbot file you downloaded to put on your desktop.)
After that open your bot and click on settings, edit files, config file.
It will bring up a notepad, look for a line that sais [Main]
Under it put:
SetBNLSServer=Hdx.JBLS.org
If it is already there then you don't need to do that.
Now try to connect, it should work, if it doesn't then instead of putting Hdx.JBLS.org after SetBNLSServer= try one of the following:
JBLS.org
67.171.191.71
distant-jbls.no-ip.org
logon.berzerkerjbls.com
JBLS.idiat.com
pyro.no-ip.biz
notaloafer.com
ribose.no-ip.org
If it still fails to connect then go back to you config file and remove ANY lines in your configuration file that have 'VerByte' in it.
Settings -> Edit File -> Config
Ctrl+F
Type in VerByte and hit enter, if its found delete it, repeat until none are found.
Your bot should be able to connect now.
Notes:
The bot will not connect if you have an active firewall so you will need to turn it off or configure it to alow stealthbot to conect.
In order to make this work, you must have selected "BNLS - Battle.net Logon Server" in your Advanced Connection Settings and not "ADVANCED - Local hashing". It should be set to BNLS by default though.
If you are using Windows Vista and have troubles finding your config file this tutorial might help you: www.stealthbot.net/board/index.php?showtopic=17469
Also if you are using the bot that connects to starcraft the bot WILL automatically disconnect after two minutes because of Warden. There is no way to correct this at the moment, you will need to keep pressing connect or use the reconnect plugin if you have it.
Download it, click save to desktop, not open or run.
Next, After its done there should be an icon on your desktop that sais Installsb
Click it, press I Agree, then make sure its being installed into your program files unless you dont want it there.
Hit install.
Once its done now there should be the stealthbot icon on your desktop,
click it to open your bot.
Next you need to press settings then bot settings at the top of the bot, it should bring up a box that looks like this:
Enter your Warcraft Username, then password, then cd key (and the expansion key if you want to get on frozen throne). When entering your cdkey do not put dashes or spaces in it. Add the channel you want the bot to go too, choose a server, then choose the game you want it to connect too. (you need a key for each game you want to get on.) Then hit apply and close.
At this point if you press connect then it WILL come up with one of the following messages:
-Version Check Failed
[BNET] Version check failed!
[BNET] BNLS has not been updated yet, or you experienced an error. Try connecting again.
-Bad Product Version
[BNLS] Error! Bad product version.
-BNLS Error 10022 (not the run-time error)
[BNLS] Error 10022: Socket not bound, invalid address or listen is not invoked prior to accept
-BNLS Error 10053/10054
[BNLS] Error 10053: Connection is aborted due to timeout or other failure
[BNLS] The BNLS server has terminated your connection.
[BNLS] Error 10054: The connection is reset by remote side
[BNLS] The BNLS server has terminated your connection.
-BNLS Error 10060/10061/10065
[BNLS] Error 10060: The attempt to connect timed out
[BNLS] The server took too long to respond to your computer. The BNLS server appears to be unreachable at this time.
[BNLS] Error 10061: Connection is forcefully rejected
[BNLS] The server you're connecting to is currently down. The BNLS server appears to be down at this time. Please keep trying, or wait an hour or so and try again.
[BNLS] Error 10065: No route to host.
-BNLS Error 11001/11004
[BNLS] Error 11001: Authoritative answer: Host not found
[BNLS] Your computer is unable to contact the BNLS servers.
[BNLS] Error 11004: Valid name, no data record of requested type
[BNLS] Your computer is unable to contact the BNLS servers.
Version disabled (mostly stuck at "[BNET] Checking version...")
This version of StealthBot has been disabled.
Please visit www.stealthbot.net for more information and to download an updated version.
(If you are receiving this message in error, please check your firewall settings, especially programs such as Norton Internet Security. NIS is notorious for blocking the connection to the BNLS server.)
In order to fix this you must go here:
www.stealthbot.net/board/index.php?showtopic=11542
On step 1 it has 2 Files to download, since you are using the bot for warcraft right click on the one that sais: Diablo II and Warcraft III: StealthBot v2.6R3.exe
Save it to your stealthbot folder, when it asks if you want to replace the old one you MUST hit yes.
(because you have done this you must also get rid of the stealhbot icon on your desktop, and create a shortcut from the new stealthbot file you downloaded to put on your desktop.)
After that open your bot and click on settings, edit files, config file.
It will bring up a notepad, look for a line that sais [Main]
Under it put:
SetBNLSServer=Hdx.JBLS.org
If it is already there then you don't need to do that.
Now try to connect, it should work, if it doesn't then instead of putting Hdx.JBLS.org after SetBNLSServer= try one of the following:
JBLS.org
67.171.191.71
distant-jbls.no-ip.org
logon.berzerkerjbls.com
JBLS.idiat.com
pyro.no-ip.biz
notaloafer.com
ribose.no-ip.org
If it still fails to connect then go back to you config file and remove ANY lines in your configuration file that have 'VerByte' in it.
Settings -> Edit File -> Config
Ctrl+F
Type in VerByte and hit enter, if its found delete it, repeat until none are found.
Your bot should be able to connect now.
Notes:
The bot will not connect if you have an active firewall so you will need to turn it off or configure it to alow stealthbot to conect.
In order to make this work, you must have selected "BNLS - Battle.net Logon Server" in your Advanced Connection Settings and not "ADVANCED - Local hashing". It should be set to BNLS by default though.
If you are using Windows Vista and have troubles finding your config file this tutorial might help you: www.stealthbot.net/board/index.php?showtopic=17469
Also if you are using the bot that connects to starcraft the bot WILL automatically disconnect after two minutes because of Warden. There is no way to correct this at the moment, you will need to keep pressing connect or use the reconnect plugin if you have it.
